SSL in newsbin pro versie 5

[Rooie Darp]

Wie weet hoe je SSL in Newsbin pro versie 5 insteld?

Gerrit

[Cheetah]

Advanced Options For first time use, none of these settings need to be modified. Once you are comfortable using NewsBin and want to get more performance, or are using multiple servers, then these settings help. * TCP Port: The default of 119 should not be changed unless you are running through a tunnel, proxy, or using an alternate port. If you are interested in running on an alternate port to try to get around a firewall or bandwidth limiting by your ISP, you can learn more about it in the Using Alternate Ports section. * Use SSL: If your news server supports SSL (also referred to as NNTPS when used for news servers), select this option and all traffic will be encrypted using SSL. * Set SSL Port: Use this if you need to connect on a non-standard SSL port. When you enable "Use SSL", it automatically uses the standard port for NNTP over SSL which is 563. * Slave Server: If you have multiple news servers, use this setting if you don't need NewsBin to download headers from this server. In general, your best server should not have this set so you get the most available headers. If you only have 1 server, you must have this turned off if you plan to download headers. * Fill Server: If you have a metered server and want to minimize the amount that is downloaded from it, use this option so NewsBin will only use it if no other servers have the post. * Use Typical Retention: Set this to the number of days of posts that your news server typically stores. This is only useful if you run multiple servers with varying retention. The setting tells NewsBin not to even try to download from the server if a post is older than the "Typical Retention" and will save you from seeing lots of red in your progress bars indicating download errors from this server. * New Server: This button allows you to add an additional server for NewsBin to use. It will first prompt you for a server name (can be anything you want) and give you the option to copy the settings of an existing server as a starting point. You can then modify any of the above options for this server. Make sure the server you wish to modify is highlighted in the Servers list first. * Delete Server: Highlight a server in the Servers list and hit this button to delete the server. * Reset: The Reset button in the upper right hand corner of the Server Options Screen will reset the count of bytes downloaded from the selected server. You can click on each server in your servers list to see the amount downloaded from it in the box immediately to the left of the Reset button. In this example, it shows that 59MB has been downloaded from the Giganews server.

http://help.newsbin.com/index.php/In...iguration_File

kijk eens hier, daar staat hoe je newsbin moet configureren

Bij advanced opties moet je blijkbaar use sll aanvinken en bij sll port moet je de poort invullen.

[Rooie Darp]

Denk dat mijn versie daar toch niet geschikt voor is.
Zal een kijken naar een nieuwere versie.

In ieder geval bedankt.

Gerrit